Aluminum 6061 plate
- Typical density
- 2.7 g/cm³
- Product scope
- Alloy density; select temper separately.
Manufacturing resources / materials
Start with the
exact material.
Grade, condition and product form belong beside the material name. Use this index to prepare a more specific project brief.
← All manufacturing resourcesMetals & engineering polymers
Source check: 2026-10-24. Each listed density matches the named manufacturer or supplier reference. Product grades differ; use the exact supplier specification for your stock.
| Material | Product scope | Typical density (g/cm³) | Reference |
|---|---|---|---|
| Aluminum 6061 plate | Alloy density; select temper separately. | 2.7 | Kloeckner Metals source ↗ |
| Aluminum 7075 | Alloy density from supplier table; select temper and product form separately. | 2.8 | thyssenkrupp Aerospace source ↗ |
| TECAFORM AD natural (POM-H) | Ensinger natural homopolymer stock-shape grade; not all acetal grades. | 1.43 | Ensinger source ↗ |
| TECAPEEK natural (unfilled PEEK) | Ensinger unfilled natural stock-shape grade; not filled PEEK. | 1.31 | Ensinger source ↗ |
| Sanmac 304/304L | Alleima billet product reference; not a blanket specification for all stainless. | 7.9 | Alleima source ↗ |
Aluminum 7075
- Typical density
- 2.8 g/cm³
- Product scope
- Alloy density from supplier table; select temper and product form separately.
TECAFORM AD natural (POM-H)
- Typical density
- 1.43 g/cm³
- Product scope
- Ensinger natural homopolymer stock-shape grade; not all acetal grades.
TECAPEEK natural (unfilled PEEK)
- Typical density
- 1.31 g/cm³
- Product scope
- Ensinger unfilled natural stock-shape grade; not filled PEEK.
Sanmac 304/304L
- Typical density
- 7.9 g/cm³
- Product scope
- Alleima billet product reference; not a blanket specification for all stainless.
Strength, allowable stress, temperature limits and material substitutions require a separate review. This index does not establish design allowables.
Bring these details to the review
- Exact grade, temper or heat treatment, and product form.
- Operating temperature, environment, loads and mating materials.
- Required finish, coating and inspection condition.
- Supplier specification, certificates and who may approve an alternative.